A Step by Step Guide to Pool Construction

Building Your Dream Swimming Pool

Once you've decided to build your dream swimming pool, the following is the construction process that Queensland Family Pools will follow:

Step One: Paperwork

After signing a contract, there is roughly two weeks of organising paper work. Firstly, we will have our engineer, Mr Des Newport, draw up a detailed plan and drawings, including details of levels, datum points, steel plans, concrete plans and hydraulic plans. After we get the finished plans from Mr Newport, we will lodge them with the Local Council for approval. At the same time, we will lodge your Watertight Completion Insurance with SPASA.

Step Two: Excavation

After we have confirmation of the Council approval, we will contact you to arrange the pool excavation. The day involves a bright and early 'mark-out' of the pool at 6.30am. At about 7.00am, the excavator and trucks will arrive and commence the excavation of your pool. Although it is not necessary to remain onsite after the mark-out, it is advisable to get the day off work and remain onsite until the excavation is completed. On this day, the steel load will be delivered as well.

Step Three: Steel Fixing

After the excavation, the steel fixers come in to do the steel fixing. Their job, essentially, is to create a criss-cross steel cage around the whole interior surface of the pool, for the concrete to be sprayed to. The steel fixers mark out steps and benches at this stage. After they have finished, a Queensland Family Pools employee will come to the site to pre-plumb the interior of the pool. This means making plumbing provisions that need to go through the concrete and included all the pool returns, pool suctions, solar provisions, spa, blower lines, water features, electrics etc.

Step Four: Concreting

Our concreters spray a 175mm thick 25 MPA gun crete pool spray mix to the wall of your pool, which is then shaped with special tools by our shapers. After the concreters have finished, you will need to water the shell down to allow it to absorb moisture twice a day for two weeks.

Step Five: External Plumbing

Our plumber will need you to have decided where you would like your pump and filter situated in your yard, before he gets to the site. You'll also need to leave some power connections out, for all other tradesmen that need to come onsite. There is no need for you to be onsite for the plumbing. The plumber will run all lines from the pool, including the return lines, the suction lines, spa lines, blower lines, water feature lines, and heating lines back to the site of the pump and filter. The pump, filter and self cleaning chlorinator will sit on a 600mm x 900mm concrete slab.

Step Six: Coping and Landscaping

At this stage, the coping and/or granite rocks, waterline tiles, surround paving and any water feature rocks or blocks will be delivered and constructed/laid. The coping and waterline tiles are laid on a bed of sand and cement by licenced professionals. Expansion joints will also be installed to allow for concrete movement. In the case of additional paving ouside the pool coping, a further expansion joint will be installed between the pool top and the surrounding slab.

Depending on the type of coping and/or paving you choose, you may need to seal it after it has been laid. Formal water features are constructed out of besser blocks that are core filled with steel reinforced concrete, and then rendered for a stunning finish.

Step Seven: Fence Inspection

After the plumbing and coping have been completed, and before the pebble is installed, you will need to have the fence inspected by our private certifier. The inspection fee will have already been paid for by Queensland Family Pools in your initial lodgement. Queensland Family Pools will organise your pool fence inspection. Once the fence has passed the inspection, you need to inform Queensland Family Pools as soon as possible, so that we can book your pebble interior.

Step Eight: Pebble Interior

On the day of the pebbling, the pebblers will get to the site any time between 7.00am and 2.00pm, as they do six or seven jobs a day. The pebble is sprayed onto the concrete and then smoothed out with a trowel. The Pebble or Glass Interior acts as a bladder inside your pool to further prevent leaks. The pebblers will then come back the next morning to acid wash the pebble and begin filling the pool. It is important that you do not turn the hose off until it is touching the coping or you will get a tide mark on the pebble.

Step Nine: Start Up

Once the pool is full, call the Queensland Family Pools office on 07 3216 5004, and we will arrange to have the pool started up. This includes cleaning the pool and filtration equipment, starting up the pump, filter and chlorinator, and chemically balancing the pool.

Step Ten: Hand Over

Essentially, this is your driving lesson for the pool. If you are building a dream for the first time, this appointment is VERY important, as it explains to you how to look after and maintain your pool equipment, and keep the chemicals in check.

This marks the conclusion of the pool building process

CONTACT US TODAY for your own elegant, stunning, high quality pool
that makes the neighbours jealous!